DRAM Detective · Case File 1.12

Cut It Down the Middle

Vref is the voltage line that decides 0 or 1 — cut it down the middle and both sides keep their margin.
Above the line is a 1, below it a 0…
Vref = the 0/1 decision line · one ruler isn't enough · differential needs none
Vref · the 0/1 decision line (the cut) 1 0 Vref lean high → 1's slice thin 1 0 Vref cut in the middle → equal one shared zero — the average per-bit — tare each scale +2g −1g +3g +1g one average for all empty pan reads off — one average can't zero each 0g 0g 0g 0g press each tare button → all read 0 one baseline + a small per-bit offset · DQ, CA, CS are three paths → three lines differential — CK_t / CK_c single-ended — DQ crossing = the reference, no ruler drawn Vref 1 0 one wire → needs a Vref drawn CK / DQS say WHEN (edge) · DQ + VrefDQ say WHAT (0 or 1)
Step 1 of 3
Cut the line right down the middle, and both sides keep their margin. Lean one way, and that side gives out first.